Dark

The 1-Week Chevy C10 Build and Road Trip-PART 2: Finnegan's Garage Ep.133 

Views 197K
99% 1 965 7

The crew is working 12 plus hour days to design, fabricate, assemble, plumb, wire my C10 pickup so that we can go cruising. Yesterday we made great strides on the fabrication side of things, checking off items, which include the radiator mount, stainless steel exhaust "x-pipe" and V-band joints, as well as custom flaring stainless steel brake lines. The Cab of the C10 is still not back on the custom tube chassis. Maybe that will happen tomorrow.
We have less than a week to get my 1967 Chevy C10 running and driving so that we can cruise it to MRC Fabrication in Kernersville, North Carolina. We are going to drive it there on Sunday March 7th to go check out the progress on my 1961 Cadillac Coupe DeVill. You guys are welcome to meet us there if you want. The address is 616 Indeneer Drive, Kernersville, NC 27284.
All of the C1 videos we are uploading this week have been made possible by the good folks at Wire Care. Wire Care distributes everything you need to wire and plumb your hot rod, muscle car, truck, drift car or tricycle and we are using everything from battery cable to heat shielding products during the thrash to finish my C10. Want to see more? Visit www.wirecare.com
There's also bonus daily content on Wirecare's Instagram account, which is @wirecare_inc
and Here is a link to the Fireflex product we used to protect our battery cable: www.wirecare.com/category/braided-sleeving/extreme-temperature-sleeving/fireflex
Like my radiator? Here's a link to the Delta PAG's website: deltapag.com/
Like that Eastwood Tools flaring tool? go here: www.eastwood.com/professional-brake-tubing-flaring-tool.html?gclid=CjwKCAiAp4KCBhB6EiwAxRxbpN1527M6UyxJvaUQAL6VWqwXXRw3gcHbU6AfJHNgdKmmVsQC2_DnsRoCqTwQAvD_BwE
Want some Finnegan Speed and Marine swag? Go here: www.fsmgarage.com
thanks for watching and supporting this channel!
-Finnegan

Autos & Vehicles

Published on

 

Mar 4, 2021

Share:

Link:

Download:

Loading link...

Add to:

My playlist
Watch later
Comments 100   
Lovin' KPs
Lovin' KPs 18 days ago
First the google shirt then a bad obsessions shirt... awesome!
Eastwood Company
Great demo of our Pro Brake Line Flaring Tool!
Rooster
Rooster Month ago
Bad ass hot rod truck
James Peterson
James Peterson Month ago
Love the fact that most of the comments re about the BOM t-shirt rather than the car...
Daisy Roberts
Daisy Roberts Month ago
Quality Energy ❤
Stella Vanover
Stella Vanover 2 months ago
Mullet gang
KB
KB 2 months ago
Charles Bronson poster is perfect for the show!
soiung toiue
soiung toiue 2 months ago
The easy to say all that is "Alls we lack is finishing."
Adam Garon
Adam Garon 2 months ago
Yepppp
oiuet souiu
oiuet souiu 2 months ago
Amazing video man
callthemall
callthemall 2 months ago
Props for the BOM shirt!
Gord Roberge
Gord Roberge 2 months ago
Looks great, I may look into getting the deltapag cooling fan system for My 03 S/C Marauder.
soiung toiue
soiung toiue 2 months ago
Thumbs up for Christmas vacation poster
Lyle Bartels
Lyle Bartels 2 months ago
Algorithm
benny
benny 2 months ago
Project Binky has been seven years, project C10.......7 days.
oiuet souiu
oiuet souiu 2 months ago
Really amazing
G&GFactoryMade
G&GFactoryMade 2 months ago
SHITTERS FULL!!!
D W
D W 2 months ago
When and where will guys be back in North Carolina again?
Will B
Will B 2 months ago
I am sure the sponsor loved to hear you call their product "scrap" 😉 😂
Leho M
Leho M 2 months ago
Using compressed air to put cables ints sleeves is old telecom tric. Nowdays we blow kilometers fiberoptics into underground pipes in one go.
Richard Barr
Richard Barr 2 months ago
I've sleeved cable in garden hose to help prevent abrasion in the past. Didn't think of the compressed air trick, instead I stood on my roof and let gravity assist! Dumb yes, but if it works...?
Nice Guy
Nice Guy 2 months ago
Why not move the trottlebody about 90 degree, then you get a nicer bend on the tube..
confucious say
confucious say 2 months ago
That flare tool is the absolute BEST!! Worth every penny.
Sammy Pettit
Sammy Pettit 2 months ago
Great job on explaining how to use the flare tool
JP S
JP S 2 months ago
Does anyone else miss the cardboard to-do lists? This whiteboard stuff is throwing me off
zero two
zero two 2 months ago
love the BOM t shirt !
Joshua Barker
Joshua Barker 2 months ago
Big props for Bad Obsession shirt
Nathan L
Nathan L 2 months ago
Thumbs up for Christmas vacation poster
nathaniel vanorschot
Comment
brennenrulez
brennenrulez 2 months ago
shitters full!
Soulflylost
Soulflylost 2 months ago
How many degrees was the an flare again? =)
MrAnnoyedGuy
MrAnnoyedGuy 2 months ago
All that video and I still don't know the angle to flare for AN fittings
Al .D
Al .D 2 months ago
Cfm? Cub ft per min? Still no idea what that’s in metric. Cheers from a EU viewer. Because of beers in my hands I can’t use a calculator now
Emiliano Paz
Emiliano Paz 2 months ago
half of the video is how to run a wire
Alan Pittman
Alan Pittman 2 months ago
Is that Randy Quaid? "Shitter's full"
Harold Birge
Harold Birge 2 months ago
I have a 70 short box C10 an original 396 truck it's kind of my roadkill truck dangerous to Drive so fun
Mark H.
Mark H. 2 months ago
I would really like a ramp truck update.
Ryan templeman
Ryan templeman 2 months ago
Awesome build can’t wait to c it done I have a c10 that’s been waiting for attention so I understand the feeling
Alden Larrick
Alden Larrick 2 months ago
BOM shirt but yet not once did I get a chance to get my funk out or have a biscuit. One bracket was made but not video of it being made.
Chase Morgan
Chase Morgan 2 months ago
Big props to the whole team to hustling this build, I have been excited about it for years! And a big shout out to Chris Read for getting an edit out every day. Damn impressive.
Marty Roberson
Marty Roberson 2 months ago
Looking like awesomeness
AJ
AJ 2 months ago
LOL! Its almost, kinda, pretty, so, close to being done!
Farmer Jim
Farmer Jim 2 months ago
The last 20% of work consumes 80% of project time...
Jsib0
Jsib0 2 months ago
yoooo big up the bad obsession shirt
Spearmint T
Spearmint T 2 months ago
Hey Mike, I've seen a Ford Centurion rolling around Marietta with Roadkill decals on it, you know anything about it? Seems like the kind of thing you'd buy or trade for a little project!
Stinkydogfart
Stinkydogfart 2 months ago
The wiring guy gets some credit for the BOM shirt, but this show is in need of some serious bracketry!
Jeff E
Jeff E 2 months ago
If ya'll are ever anywhere near Charleston SC doing an event, please please let me know.....I'd love to buy ya'll a beer and shake Mike Cotten's hand. He never fails to give me a laugh.
Kenneth Washburn
Kenneth Washburn 2 months ago
Anybody else get cringy when Cotton kept saying 37 degree flare when there was clearly a 45 degree flare still in the tool? Whew!
Kenneth Washburn
Kenneth Washburn 2 months ago
@Norm Graham I have the same tool as well. At the beginning it looked like a 45° flare before the work started.
Norm Graham
Norm Graham 2 months ago
5:21, you can clearly see 37 degree on the die and 37 degree on the turret... Or am I missing something else in the video??? I have that same tool from Eastwood with both sets of dies, it is an awesome tool to have.
Tad Sona
Tad Sona 2 months ago
Why do all of the episodes about the c10 feel like 70+% product advertising and 30% work/tips? i'd be much happier if it were closer to 70% work and tips and 30% ad/product advertising.
Jared Miller
Jared Miller 2 months ago
I love my Eastwood flare tool, it’s the only one that I could personally get to hold the larger tubes and not slide
Antonp21654
Antonp21654 2 months ago
Super video! I applauded for US$10.00 👏👏👏
Doug Hills
Doug Hills 2 months ago
Thanks for improving the audio. Very clear now.
Tim Anderson
Tim Anderson 2 months ago
I've got the same brake flare tool. Works great. I gave my other brake flare tools away. Good looking truck.
Traveling Kaspers World
I wanted to help too, but I showed up in an orange t-shirt and they sent me home for dress code violations.
maybe paradigm
maybe paradigm 2 months ago
Done at 4:04 just one long asssssss commercial. F off
Bill Taylor
Bill Taylor 2 months ago
Awesome Build!
ChristianX Z owner
ChristianX Z owner 2 months ago
Does the board list work better on this show..💪😁♥️
Nick Rynenberg
Nick Rynenberg 2 months ago
You guys making good progress, hopeing you guys had a good sleep and it get even better as you go!
Christian Jud
Christian Jud 2 months ago
Comment
RandomRon
RandomRon 2 months ago
@Finnegan's Garage building a slammed 67 C10 to go check out your badass Caddy. Thank you for doing this for all of us!! Now let's talk about that paint job on Binky.
Mazdarati 86
Mazdarati 86 2 months ago
BOM and FSM collaboration 🤔
BIG K
BIG K 2 months ago
Man I'm loving theses vids. Short and sweet but lots of action.
Murray Liley
Murray Liley 2 months ago
TO MUCH TO DO, YOU WONT MAKE IT. SORRY MATE!!!!!!!!!!!!!!!!!!!!!!!!!!!
marty
marty 2 months ago
BOM?? Aren't they the wankers that started a project 100 years ago and are STILL fooling around with it??? Come on Binky!!
Nigel Noles
Nigel Noles 2 months ago
Hey .Mike. any chance you would sell me those Moroso valve covers? Mounted on the wall. They would be giing to a good home here in Australia
teamidris
teamidris 2 months ago
12ft of power cable and I’m thinking it might as well be a copper rod in a plastic tube run down the chassis like a brake pipe. *thread the rod ends for cable-eyes.
Shane Williams
Shane Williams 2 months ago
Content hasnt been this good since Tim the tool man Taylor
steve earley
steve earley 2 months ago
Let Mr Cotten do more how to do's so so well articulated , thumbs up.
Restos & Rebuilds
Restos & Rebuilds 2 months ago
Less talking, more work being done is what I'd rather see lol
Scott M Brown
Scott M Brown 2 months ago
where is the road trip?
draggonhedd
draggonhedd 2 months ago
Radiator fans always trip me up with the blade design. Are those blades mounted the right way around for a pull setup?
banditlow12
banditlow12 2 months ago
You should just give me this truck....I've watched, commented, and liked many of your videos! Love the content. Keep up the "ok, it's good enough work" Can't wait to see the caddy.
Rickey Racer
Rickey Racer 2 months ago
Roll On!
imports145
imports145 2 months ago
To much talking in videos no building 👎
winston cryer
winston cryer 2 months ago
Yeah you can tell he needs to get some sleep man you can barely understand what the hell are you saying and I don't think he knows quite exactly what he's saying go to bed 🥱🥱
winston cryer
winston cryer 2 months ago
Please forgive me but is anything getting finished I know it's a lot of work four guys. 😁😁😁😁🤪😜
John Davis
John Davis 2 months ago
Dude I'm trying to turn around a head gasket replacement in a week, and here y'all doing a whole truck!
Things I Use Everyday
Love this build! I need a montage for my 66 C10
jobravo55
jobravo55 2 months ago
Finnegan , check your messages
Lyle Hann
Lyle Hann 2 months ago
I had to do a pull of just shy of an 1/8 of a mile of wire through 1 pipe with 7 turns and 4 elevation changes. Actually it was 9 # 12 wires, hardest pull of my life. I suck a string through with a piece of caution tape on it with a vacuum, used that pull a small rope, then used that to pull 1/2 rope then taped rope 15ft down down wire and had some kid literally shove handfulls of yellow 77 which is basically yellow astroglide and used 1 1/2 5 gal buckets but we got that bitch through. It was a gas plant so we could not have a junction box it had to be solid runs. I was a stones throw away from hooking up the winch off the truck
Shadetree Mechanic Racing
You are getting it ready for me? I already have a C10.
AMLagonda
AMLagonda 2 months ago
BOM Represent (òÓ,)_\,,/
Jack Mortenson
Jack Mortenson 2 months ago
That exhaust looks really sweet.
Manny S
Manny S 2 months ago
That transmission costs more than my car.
Robert Wallis
Robert Wallis 2 months ago
better than road kill
Talsu
Talsu 2 months ago
Just knocking over a couple of extra jobs while it's off the road getting a tail light replaced... 😅👍
TheZmt325
TheZmt325 2 months ago
Rick flair enters the chat. Whoooooo thats a lot of flare!!!!
Jon Hill
Jon Hill 2 months ago
Support 👍
Mark Brewer
Mark Brewer 2 months ago
1:26 is that Randy Quaid dumping the shitter in Clark Griswald's planter there on the right?
Finnegan's Garage
Finnegan's Garage 2 months ago
it is!
Jer Sargis
Jer Sargis 2 months ago
Dude
shua87
shua87 2 months ago
Love seeing the Bad Obsession Motorsports shirt!
Josh Jones
Josh Jones 2 months ago
Are the rad fans oriented correctly?
John P
John P 2 months ago
@Josh Jones my pleasure
Josh Jones
Josh Jones 2 months ago
@John P Awesome. Thank you for being willing to engage the community like this, even for such a simple question.
John P
John P 2 months ago
@Josh Jones oh, the way the blades look, right, yes they are pullers. The DeltaPAG blade geometry is very unique and designed for efficiency and to take advantage our brushless motor tech. BTW, I'm one of the engineers at #deltapag
Josh Jones
Josh Jones 2 months ago
@John P cool. The blade pitch just seemed off to me. It looked like they will push air forward though the rad instead of pulling into the engine bay.
John P
John P 2 months ago
Yup, did them myself, ecms on the bottom
John
John 2 months ago
Not sure why I get truck videos when I look on you tube. ? Not sure why dumb guys work on trucks all the time? I think it reflects thier personalities. Stupid generic and dull, as these idiots are.
Jason Boyce
Jason Boyce 2 months ago
Love the builds and content going back to the very first roadkill episode. This is too nice of a build to be done so soon. I’d like to see it get done, but my bet is, “You’ll never make it.”
Ben Blank
Ben Blank 2 months ago
Will the racepac PCM controll the fan speed without the controller ? Think they do pwm
MillerStudio44
MillerStudio44 2 months ago
Keep going.....
Cloud Sheppard
Cloud Sheppard 2 months ago
Wish Mike Finnegan would come to Texas and rewire my Chevy truck and help install a Camshaft. It is in bad fire trap status. 😂. That would be awesome. I just haven't had the chance to mess with it. I have pretty much Roadkill'd this thing for 4 years straight. Just keeps on working hard.
Will Brock
Will Brock 2 months ago
Mike, you should check out Duke Engineering Solutions, he makes some really cool things I think you might like. Specifically tool and battery holders that mount to your wall.
Robert Lambert
Robert Lambert 2 months ago
SHITTERS FULL! 1:28 and 1:50
plepgeat
plepgeat 2 months ago
Andrew and that feller with the FireFlez make Mike look like a midget.
iamgriff
iamgriff 2 months ago
Cousin Eddie is the best part of this video.
Mark Proctor
Mark Proctor 2 months ago
Awesome work
Next